close

Engine Cover

Product priceConsultation required
Product information엔진 內 외부이물질 유입을 방지하고, 엔진내부에서
발생하는 열을 차단하는 기능을 하는 부품
TAG #Rocker Cover #Engine Cover #LGHausys
Product packaging and Shipping conditionsPackaging & Shipping
12kgs/Pallet or Carton Box

Contact Supplier

Contacts

백두진
010-3684-8412
onlybback@idongsung.com

Contact supplier

Related Products

80_1-1

Rail Skirt

측면 낙석 등으로부터 적재함을 보호하는 역할을 하는 부품
85_1

Front Panel

차량 전방에 부착되어 디자인 효과 증대 및 충돌 시 충격흡수를 하기 위한 부품
Hip-Rest

Electcity Hip Rest

버스 內 입석승객이 기댈 수 있도록 편의를 제공하는 부품
Engine-Cover

Engine Cover

엔진 內 외부이물질 유입을 방지하고, 엔진내부에서 발생하는 열을 차단하는 기능을 하는 부품

적용차종

HMC : UNIVERSE

KMC : GRANBIRD

HMC : ELECTCITY

HMC : XCIENT

HMC : UNICITY

HMC : MEGA TRUCK

HMC : MIGHTY

HMC : COUNTY

HMC : GREENCITY

HMC : AEROTOWN

Product Description

  • SMC material has excellent thermal vulcanizing ability, excellent strength, and electrical insulation characteristics.
  • Seat SMC is a press molding material on a sheet with excellent moldability by impregnating unsaturated polyester resin with reinforcing material, filler, mold release agent, pigment, catalyst etc. and increasing viscosity by chemical to increase viscosity. Thus, SMC can be adjusted according to the desired physical properties of the product because its change range of strength and various physical properties is wide according to the impregnation and arrangement of glass, which is a reinforcing material, and the filler.

< Reliability Test >

Test item Test method Unit Category Test result Requirements
Gloss MS 655-08 : 5th – 1 88.4 –
Water resistance MS 655-08 : 5th – 1 Exterior No discoloration, change of color, cracking, gloss degradation, on the coating No discoloration, change of color, cracking, gloss degradation, on the coating film, and Adhesive is within M-1, 0 ~M~2.5 Color difference(△E*) : 2.0 or less /
Gray scale(Grade : Grade 3 or more
Adhesive(Grade) M-1.0
Color difference(△E*) 0.47
Gray scale(Grade) 4-5
Scratch resistance MS 655-08 : 5th Grade 1 4 3.5 or more
Moisture resistance MS 655-08 : 5th – 1 Exterior No discoloration, change of color, cracking, gloss degradation, on the coating No discoloration, change of color, cracking, gloss degradation, on the coating film, andAdhesive is M-1, 0 ~
Within M~2.5 / Color difference(△E*) : 2.0 or less /
Gray scale(Grade : Grade 3 or more
Adhesive(Grade) M-1.0
Color difference(△E*) 0.42
Gray scale(Grade) 4-5
Alkali resistance MS 655-08 : 5th – 1 Exterior No discoloration, change of color, cracking, gloss degradation, on the coating No discoloration, change of color, cracking, gloss degradation, on the coating film
There should be no discoloration, change of color, cracking, gloss degradation, and substrate exposure on the coating film /
Gray scale(Grade : Grade 3 or more
Gray scale(Grade) 4-5
Salt Spray Resistance MS 655-08 : 5th – 1 Exterior No discoloration, change of color, cracking, gloss degradation, on the coating No discoloration, change of color, cracking, gloss degradation, on the coating film
There is no change of color, discoloration, swelling, cracking, and reduction in gloss, on the coating film. Adhesive is within M-1, 0 ~M~2.5 / Color difference(△E*) : 2.0 or less /
Gray scale(Grade : Grade 3 or more
Adhesive(Grade) M-1.0
Color difference(△E*) 0.29
Gray scale(Grade) 4-5
PencilHardness MS 655-08 : 5th – 1 H or more HB or more

< Material report >

Test item Unit SampleCategory Results Test method
Loss ignition % – 29.6 ASTM D2584-11
Specific Gravity((23/23)℃) – – 1.88 ASTM D792-13(A Method)
Tensile strength MPa – 111 ASTM D638-14(*)
Flexural strength MPa – 208 ASTM D790-17(**)
Flexural modulus of elasticity GPa – 10.5 ASTM D790-17(**)
Izod Impact Strength J/m – 1.203(P) ASTM D256-10e1(A Method)
Izod Impact Strength(~40℃) J/m – 1.484(P) ASTM D256-10e1(A Method)(***)
Load deformation temperature(1.82MPa) ℃ – Not measurable(****) ASTM D648-16(B Method)
Absorption rate(24h Immersion) % – 0.47 ASTM D570-98(2010)e1

* Test speed : 5 mm/min, Test surface : Type I / ** Test speed : 1.4 mm/min, Distance Between Supports : 50 mm / *** Status control : (-40 ±2) ℃ X 30 min / **** Specified deformation (0.25 mm) does not occur up to maximum temperature of equipment (300 ° C)

Supply Ability

  • Process: 800T/ 1000T/ 2500T PRESS -> Sanding -> Painting -> Assembly
  • Lead Time : 2 days

Packing & Delivery

  • Packaging Details : 12kgs
STEP Step-2 GRILL-RE Grill