close

ROLLED ZINC SHEET

Product priceConsultation required
Product informationzinc-copper or zinc-copper alloy zinc sheet and coil
Country of originConsultation required
TAG#rolledzinc #rolledzincsheet #zincsheet #zinccoil #zincalloy #zamak #zama #computer #car #bulb #zinccalot #zinccalots #zincanode #zinccan #zincdross #zincscrap #zincingot #diecasting #gutter #downpipe #elbow #houseelbow #roof
Product packaging and Shipping conditionsPackaging & Shipping
Depending on Type of Product, Any Incoterms.

Contact Supplier

Contacts

변지윤
+82-51-200-4615
jyoon@musign.net

Contact supplier

Related Products

45

SM(STYLENE MONOMER)

To produce styrene monomer, ethylbenzene is created by reacting benzene with ethylene under catalytic reaction and dehydrogenation reaction of ethylbenzene.
14

Zinc Dust (Zinc Powder)

아연말(Zinc Dust)은 산화방지제로 공기, 물, 이산화탄소 등과 철 또는 금속과의 접촉을 방지함
13

Zinc Ash & Zinc Skimming

아연재 또는 아연스키밍은 산화아연 제조, 용융도금 그리고 아연코팅 시 나오는 부산물로 주로 아연의 재사용
13

Zinc Ingot (SHG/HG/Remelted/Secondary)

Spelter Special High Grade is excellent for corrosion protection, and it is an essential element for organic materials such as metal, sun cream, paint, rubber, diecast, batteries etc. that are easily found.

Product Info

Business Field Market Manufacturer Department
Consultation required Consultation required Consultation required CT team

Product Description

  • * 표면마감 Natural zinc with Medium-Shine Gloss Surface Finish
  • * Sizeconsultation inquiry
  • * UsesGutter (eave trough, Gutter)
    Roof-Accessories
    Elbows
    Down-Pipe
Properties European Norm EN 988 Our Rolled Zinc
Chemical Characteristics
Zinc quality Z1 (99.995%) Zn 99.995% EN1179
Copper (%) 0.08% – 1.0% 0.120% – 0.140%
Titanium (%) 0.06% – 0.2% 0.065% – 0.075%
Aluminium (%) 0.015% max 0.003% – 0.006%
lota I Lead + Cadmium (%) not specified very limited quantities, on average below 0.0025%
Physical Characteristics
Thickness Variation (mm) ± 0.03mm ± 0.02mm
Width Variation (mm) + 2mm / – 0mm + 1mm / – 0mm
Length Variation (mm) + 10mm / – 0mm + 3mm / – 0mm
Leteral Curvature (mm) max. 1.5mm/m max. 1.5mm/m
Flatness (mm) max. 2mm max. 2mm
Mechanical Characteristics
Elastic Limit (N/mm2) 100 minimum 110 minimum
Tensile Strength (N/mm2) 150 minimum 15 minimum
rield (%) min 35% min 35%
Bending Test does not exhibit cracks does not exhibit cracks
Creep (%) 0.1% max 0.1% max
Erichsen deep drawing test (mm) not specified 7.0 mm minimum

Supply Ability

  • Consultation required

Packing & Delivery

  • Packaging : Wrapped in a Special Chemically Coated, Humidity Absorbing Paper
  • Lead Time : Consultation required

Application

  • Elbows
  • Down Pipes
  • Gutters
Zinc Anode (Electroplating) Zinc-Anode 17 Zinc Calots (Slugs)